上海金炜五金机械有限公司

日本迷你研磨工具及耗材

大平面研磨抛光机

RMB-II (B90050)

RMB-X

HMB-E (B90052)

FEATURES 特点

As only 1.4kg of light body, Roller Mini can be operated by one hand. The powerful torque is unimaginable from the super compact body.
Roller Minico series have a wide variety of option tools such as sanding belts, brush wheels, polishing buff, hairline wheels etc. for a wide range of applications.
You can start operation at once when you get Roller Minico as standard accessaries are attached.

只有1.4公斤重的机身可以单手轻松掌握, 紧凑的机身可输出难以置信的强大扭矩；
可广泛的选配附件包括砂带、刷轮、抛光布、金属拉丝轮等；
配合原厂的标准附件，您可以立即开始工作。

APPLICATIONS 适用范围

WOODEN PRODUCTS Table, Chair, Side Board, Bed, Cheat of Drawers etc. Available from rough sanding to finishing after painting.

PLASTIC PRODUCTS Clear finish of Round and Curved Surface, Deburring and Removing scratch of plastic products.

GLASS PRODUCTS Finishing of edge and Removing scratch etc.

METAL PRODUCTS Deburring, Removing scratch, Sanding, Polishing for all kinds of Steel, Iron, Non-ferrous metal, Hairline finish of stainless steel etc.

木器产品加工 家具、门窗、工艺品等的加工，可完成由粗砂至上漆后抛光的整道工序。
塑胶产品加工 可抛光弧面及曲面，修边去毛刺，清除塑料产品的表面划痕等。
玻璃制品加工 抛光边角及清除划痕等。
金属制品加工 适用于对所有钢、铁、有色金属、拉丝钢板的修边去毛刺、清除划痕、砂磨等加工。

Typical Applications 典型应用案例

曲面
For Curved Surface

拉丝
For Hairline Finish

平面
For Flat Surface

凹面
For Concave Surface

圆面
For Round Surface

凸面
For Convex Surface

Convenient Function 便捷的功能

		可接除尘管至真空吸尘系统 Available dust vacuum system.		可调整平面切削深度（选配：前端水平滚轴） Available adjustment cutting depths as such as Plane. Option: Front level roller kit

通过进气调节阀可调转速后排气系统可保证砂磨面不被水、油损坏 Available adjustment R.P.M. of Air Adjust Valve. Sanding surface is not damaged nor spoiled by OIL and WATER DUE to Rear Exhaust System.	安静而低震动的电机可输出强力扭矩 Quiet and vibrationless MOTOR produce very strong power		角度可调整 Angle adjustment is possible.

		配合砂磨导向器可顺利完成金属拉丝 Hairline finish available with Sanding Guide.		平面抛光操作简易（选配：压平器） Easy operation for flat finish. Option: Sanding Shue Set

SPECIFICATIONS 参数配置

ITEM NOS. 型号	RMB-II (B90050)	RMB-X	HMB-E (B90052)
PHOTO 图片
TYPE 类型	PNEUMATIC 气动	PNEUMATIC 气动	ELECTRIC 电动
MAX RPM. 最高转速	6,500 r.p.m.	6,500 r.p.m.	5,500 r.p.m.
ADJUST RPM. 可调转速	OK	OK	NO
BELT SIZE 皮带尺寸	60 x 260 mm	60 x 260 mm	60 x 260 mm
WHEEL SIZE 轮尺寸	60 x DIA.50mm	60 x DIA.50mm	60 x DIA.50mm
WEIGHT 重量	1.4 kg	1.4 kg	2.16 kg
W x H x L 尺寸	100x115x170 mm	100x115x170 mm	100x122x245 mm
AIR CONSUMPTION 耗气量	0.5 m3/min	0.5 m3/min	-
ELECTRICITY CONSUMPTION 耗电量	-	-	550W
AIR INLET 进气	1/4 N.P.T.	1/4 N.P.T.	-
VOLTAGE 电压	-	-	220V(100V,110V)
POWER 力量	-	-	210 W
ACCESSORIES 附件	Sanding Guide / Sanding Belt / Hex Wrench / Cupler / Air Regulator / Oil	Sanding Guide / Sanding Belt / Hex Wrench / Cupler / Air Regulator / Oil	Sanding Guide / Sanding Belt / Hex Wrench

在线咨询：
咨询电话：	400-888-1997
	021-63614980　63606193　63511985　63521866